# changelog

author: Mátyás Selmeci <matyas@cs.wisc.edu> - 3.6-9
changelog:
  - Replace RPM-GPG-KEY-OSG-3 with something that's accepted by rpm on both EL7 and EL9 (SOFTWARE-5408)


author: Brian Lin <blin@cs.wisc.edu> - 3.6.0
changelog:
  - Add configuration file for osg-incommon-cert-request (SOFTWARE-5668)
  - Update default CSR key length to 4096, add CLI option (SOFTWARE-5651)


author: Brian Lin <blin@cs.wisc.edu> - 3.6.1
changelog:
  - Fix bug with default CA config file option (SOFTWARE-5668)
  - Update default InCommon IGTF CA IDs to point to CA 3


author: Dave Dykstra <dwd@fnal.gov> - 3.7.0
changelog:
  - Convert osg-incommon-cert-request to use urllib3 instead of M2crypto 
    for its https connection, to make it work properly on EL9.


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 6.9.2-2
changelog:
  - Take new 10-stash-plugin.conf file from upstream (SOFTWARE-5350)
    (replace 10-stash-plugin.config with it, for consistency with upstream)


author: Carl Edquist <edquist@cs.wisc.edu> - 2.6.3-1
changelog:
  - Restore ProbeConfig symlinks, and other dcache-transfer fixes (SOFTWARE-5241)
  - Replace default_prefix with _datadir; drop relocatable Prefixes


author: Carl Edquist <edquist@cs.wisc.edu> - 2.7.0-1
changelog:
  - Prefer CpusProvisioned over RequestCpus if set (SOFTWARE-5246)
  - Prefer MachineAttrGLIDEIN_ResourceName0 for ResourceName calculation;
  - Include GLIDEIN_ResourceName in SYSTEM_JOB_MACHINE_ATTRS (SOFTWARE-5249)


author: Brian Lin <blin@cs.wisc.edu.> - 2.8.4-1
changelog:
  - HTCondor AP and CE probes now drop privileges to the 'condor' user
    if run as 'root' (SOFTWARE-5531)
  - Improve logging and failure modes when encountering unwriteable
    directories (SOFTWARE-5531)


author: Bruno Coimbra <coimbra@fnal.gov> - 3.9.5
changelog:
  - Glideinwms v3.9.5
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_9_5/history.html
  - Release candidates 3.9.5-01.rc1 to 3.9.5-03.rc3


author: Marco Mambelli <marcom@fnal.gov> - 3.9.6
changelog:
  - Glideinwms v3.9.6
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_9_6/history.html
  - Release candidates 3.9.6-01.rc1 to 3.9.6-06.rc6


author: Marco Mambelli <marcom@fnal.gov> - 3.10.0
changelog:
  - Glideinwms v3.10.0
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_0/history.html
  - Release candidates 3.10.0-01.rc1


author: Marco Mambelli <marcom@fnal.gov> - 3.10.1
changelog:
  - Glideinwms v3.10.1
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_1/history.html
  - Release candidates 3.10.1-01.rc1


author: Marco Mambelli <marcom@fnal.gov> - 3.10.2
changelog:
  - Glideinwms v3.10.2
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_2/history.html
  - Release candidates 3.10.2-01.rc1 to 3.10.2-02.rc2


author: Marco Mambelli <marcom@fnal.gov> - 3.10.3
changelog:
  - Glideinwms v3.10.3
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_3/history.html
  - Release candidates 3.10.3-01.rc1 to 3.10.3-02.rc2


author: Marco Mambelli <marcom@fnal.gov> - 3.10.6
changelog:
  - Glideinwms v3.10.6
  - Release Notes: http://glideinwms.fnal.gov/doc.v3_10_6/history.html
  - Release candidates 3.10.6-01.rc1 to 3.10.6-02.rc2


author: Tim Theisen <tim@cs.wisc.edu> - 10.0.6-1
changelog:
  - In SSL Authentication, use the identity instead of the X.509 proxy subject
  - Can use environment variable to locate the client's SSL X.509 credential
  - ClassAd aggregate functions now tolerate undefined values
  - Fix Python binding bug where accounting ads were omitted from the result
  - The Python bindings now properly report the HTCondor version
  - remote_initial_dir works when submitting a grid batch job remotely via ssh
  - Add a ClassAd stringlist subset match function


author: Tim Theisen <tim@cs.wisc.edu> - 10.6.0-1
changelog:
  - Administrators can enable and disable job submission for a specific user
  - Work around memory leak in libcurl on EL7 when using the ARC-CE GAHP
  - Container images may now be transferred via a file transfer plugin
  - Add ClassAd stringlist subset match function
  - Add submit file macro '$(JobId)' which expands to full ID of the job
  - The job's executable is no longer renamed to 'condor_exec.exe'


author: Tim Theisen <tim@cs.wisc.edu> - 10.0.7-1
changelog:
  - Fixed bug where held condor cron jobs would never run when released
  - Improved daemon IDTOKENS logging to make useful messages more prominent
  - Remove limit on certificate chain length in SSL authentication
  - condor_config_val -summary now works with a remote configuration query
  - Prints detailed message when condor_remote_cluster fails to fetch a URL
  - Improvements to condor_preen


author: Tim Theisen <tim@cs.wisc.edu> - 10.7.0-1
changelog:
  - Support for Debian 12 (Bookworm)
  - Can run defrag daemons with different policies on distinct sets of nodes
  - Added want_io_proxy submit command
  - Apptainer is now included in the HTCondor tarballs
  - Fix 10.5.0 bug where reported CPU time is very low when using cgroups v1
  - Fix 10.5.0 bug where .job.ad and .machine.ad were missing for local jobs


author: Tim Theisen <tim@cs.wisc.edu> - 10.0.8-1
changelog:
  - Avoid kernel panic on some Enterprise Linux 8 systems
  - Fix bug where early termination of service nodes could crash DAGMan
  - Limit email about long file transfer queue to once daily
  - Various fixes to condor_adstash


author: Tim Theisen <tim@cs.wisc.edu> - 10.8.0-1
changelog:
  - Fold the classads, blahp, and procd RPMs into the main condor RPM
  - Align the Debian packages and package names with the RPM packaging
  - On Linux, the default configuration enforces memory limits with cgroups
  - condor_status -gpus shows nodes with GPUs and the GPU properties
  - condor_status -compact shows a row for each slot type
  - New ENV command controls which environment variables are present in DAGMan


author: Tim Theisen <tim@cs.wisc.edu> - 10.0.9-1
changelog:
  - The condor_upgrade_check script now provides guidance on updating to 23.0
  - The htchirp Python binding now properly locates the chirp configuration
  - Fix bug that prevented deletion of HTCondor passwords on Windows


author: Derek Weitzel <dweitzel@unl.edu> - 2.3
changelog:
  - Fix tokens that are bigger than 1024 bytes
  - Fix the use of $BEARER_TOKEN when accessing data
  - Allow for multiple read operations, needed on el9


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 4.2.3-1.1
changelog:
  - Update to 4.2.3-1 from upstream (SOFTWARE-4885)
  - Add Check-for-DT_REG-macro.patch to avoid compile error on EL7 due to missing DT_REG macro


author: Carl Vuosalo <carl.vuosalo@cern.ch> 4.17-2.1
changelog:
  - Upgrade to 4.17-2 tarball with the following release notes:
   - Add sites sampacs*.if.usp.br and cvmfs-*.hpc.swin.edu.au to MAJOR_CVMFS in
       squid/files/postinstall/squid.conf.proto.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.7-1.1
changelog:
  - Upgrade to 5.7-1 tarball with the following release notes:
   - Update to squid-5.7 with release notes at https://wiki.squid-cache.org/Squid-5 and
      http://www.squid-cache.org/Versions/v5/RELEASENOTES.html.
      Most important new feature in 5.7:
      - "Happy Eyeballs" feature uses the first destination IP address that responds
         from DNS, whether it is IPv4 (A records) or IPv6 (AAAA records). A consequence
         of this feature is that the dns_v4_first directive is no longer supported.
   - Add sites cvmfs-stratum-one.cc.kek.jp and cvmfs*.sdcc.bnl.gov
      to MAJOR_CVMFS in squid/files/postinstall/squid.conf.proto.
   - Remove obsolete frontier*.racf.bnl.gov from ATLAS_FRONTIER
      in squid/files/postinstall/squid.conf.proto.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.7-1.2
changelog:
  - Add pretrans scriplet to this spec file to fix problem with squid-4 to
     squid-5 upgrade where a link becomes a directory.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.7-1.3
changelog:
  - Complete the fix from 5.7-1.2. An additional work-around was needed
     for the squid-4 to squid-5 upgrade to change a directory that was generating
     yum transaction errors into a link, which silenced the errors.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.8-1.1
changelog:
  - Update to squid-5.8 with release notes at
      https://www.squid-cache.org/Versions/v5/squid-5.8-RELEASENOTES.html and announcement at
      http://lists.squid-cache.org/pipermail/squid-announce/2023-February/000145.html
      Most important new features in 5.8:
      - A predefined ACL named "to_linklocal" which matches traffic attempting to access
       link-local network services has been added. It is set to "deny" in
       squid/files/postinstall/squid.conf.proto.
      - Bug fixed where cache manager API erroneously returns "mgr_index" instead of requested
       data.
   - Add support for rpmbuild on el9
   - Add object-*.cloud to the computecanada portion of MAJOR_CVMFS in
      squid/files/postinstall/squid.conf.proto.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.8-2.1
changelog:
  - For EL9, in this spec file replace calls to obsolete "service" and add new package
     requirements.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.9-1.1
changelog:
  - Update to squid-5.9, with announcement at
      http://lists.squid-cache.org/pipermail/squid-announce/2023-May/000147.html and
      release notes at http://www.squid-cache.org/Versions/v5/squid-5.9-RELEASENOTES.html.
      squid-5.9 contains small fixes including improvement of debug logging related to the
      reply_body_max_size parameter.
   - Consistent with squid5, disallow the combination of multiple workers, ufs cache,
      and memory_cache_shared even if collapsed_forwarding is off.
   - Limit the  maximum number of file descriptors to 65536 even if the OS would allow
      a higher number.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.9-1.2
changelog:
  - With the addtion of an EL9 repository, this release includes an EL9 RPM that was
      compiled on EL9 and that fully supports Web Proxy Auto Discovery. The EL7/EL8
      RPM in this release is unchanged from 5.9-1.1, except for version number.


author: Carl Vuosalo <carl.vuosalo@cern.ch> 5.9-2.1
changelog:
  - Apply security patches from Squid 6 to address security concerns since 
      a version of Squid 6 suitable for frontier-squid is not available yet.
   - The following security vulnerabilities have been addressed with patches:
      https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-46724
      https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-46847
      https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-46848
      https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-49285
      https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-50269
      https://github.com/squid-cache/squid/security/advisories/GHSA-j83v-w3p4-5cqh
   - The following two vulnerabilities are addressed by disabling Gopher and TRACE
      requests, respectively, in the squid.conf.proto file:
      https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-46728
      https://megamansec.github.io/Squid-Security-Audit/trace-uaf.html
   - To support SELinux, require /sbin/restorecon and apply it to the log directory,
      in addition to the cache directory.
   - Update to shoal-1.0.2 to fix setting of external_ip.


author: Carl Edquist <edquist@cs.wisc.edu> - 2.0.4-1
changelog:
  - Initialize crc32
  - Fix assert in el8 due to vector reserve
  - Reorder variables to address compiler warning/error


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 2.1.3-1
changelog:
  - Fail plugin initialization if we can't get the OSS (SOFTWARE-5388)
  - If user cannot be mapped to uid, continue as anonymous
  - Change from named daemon to exec


author: Brian Lin <blin@cs.wisc.edu> - 3.6-5
changelog:
  - Add OSG release series SchedD attribute (SOFTWARE-4984)
  - Remove upstreamed blahpd location configuration (SOFTWARE-4984)


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 3.6-23
changelog:
  - Log DNs of incoming certificates (SOFTWARE-5370); raise required XRootD version to 1:5.6.0 for the feature


author: Dave Dykstra <dwd@fnal.gov> 1.13-1
changelog:
  - Disable kerberos reverse DNS lookup in order to work when the vault
    server is using a DNS alias.
  - Intelligently handle multiple IP addresses in a DNS name, timing out
    connection attempts after 5 seconds and not reusing addresses that
    failed to connect.  Tries IPv4 before IPv6.
  - Update python dependencies to current versions in pip.


author: Dave Dykstra <dwd@fnal.gov> 1.13-2
changelog:
  - Suppress python warnings in order to avoid CryptographyDeprecationWarning
    about python3.6 being deprecated.


author: Dave Dykstra <dwd@fnal.gov> 1.14-1
changelog:
  - Support wildcard host certs for all https connections.  They used to be
    supported for everything but the --vaultalias option but that support 
    was broken in version 1.13.


author: Dave Dykstra <dwd@fnal.gov> 1.15-1
changelog:
  - Revert to prior method for allowing --vaultalias as an alternate name
    for matching the host cert.  It doesn't support wildcard certs, but it
    permits allowing either the original host name or the alias and avoids
    needing separate alias options for kerberos and https.


author: Dave Dykstra <dwd@fnal.gov> 1.16-1
changelog:
  - Fix httokendecode -H functionality to only attempt to convert a parsed word
    if it is entirely numeric, not if it just contains one digit.  At the same
    time, rewrite the functionality in native bash instead of using grep and sed.
  - Add htdestroytoken command.
  - Add a symlink htdecodetoken pointing to httokendecode.


author: Dave Dykstra <dwd@fnal.gov> 1.17-1
changelog:
  - Fix the usage of getaddrinfo, which caused a fatal error on python3.9
    on Mac.
  - Make --showbearerurl work properly in combination with --nobearertoken.
  - Change the httokendecode error message for a missing token file to
    stderr instead of stdin.


author: Dave Dykstra <dwd@fnal.gov> 1.18-1
changelog:
  - Fix crash introduced in 1.17 when using --nobearertoken while the
    credkey is not known.
  - Make source rpm buildable on el9.


author: Dave Dykstra <dwd@fnal.gov> 1.20-1
changelog:
  - Update httokensh to by default set the minimum vault token time to live to
    6 days, and to make sure that the background refresh never gets a new vault
    token.
  - Changed the preferred name of httokendecode to htdecodetoken, keeping
    links in the opposite direction.
  - Add man pages for httokensh, htdestroytoken, and htdecodetoken.


author: Mats Rynge <rynge@isi.edu> 1.7-1
changelog:
  - Moved to the new ospool.osg-htc.org central managers in high
    availability setup
  - Removed pre-9.0 HTCondor config - this is no longer
    supported by the OSPool (IDTOKENS only)
  - Change the VO override to the lowercase "osg" (SOFTWARE-4905)


author: Carl Edquist <edquist@cs.wisc.edu> - 1.8-1
changelog:
  - Include the package version in the schedd classad (SOFTWARE-5105)
  - Disable .sif images on 3.x kernels (OSPOOL-18)
  - Improve OS_VERSION handling
  - Drop Map* ProbeConfig overrides (SOFTWARE-5042)


author: Brian Lin <blin@cs.wisc.edu> - 132-1
changelog:
  - Update certificates for FNAL and SLAC VOMS servers
  - Update certificates for CLAS12, EIC, GLOW, and HCC
  - Drop stale certificates for nanohub, STAR, and wisc.edu lz


author: Brian Bockelman <bbockelman@morgridge.org> - 0.9.2-1
changelog:
  - Add support for the `pelican://` protocol, allowing XCache to consume
    the federation metadata directly.


author: Brian Bockelman <bbockelman@morgridge.org> - 0.9.3-1
changelog:
  - Add support for requesting reversed connections from the Pelican connection broker.
  - Plugin no longer drops query parameters when `pelican://` is used; fixes
    issues with missing authorization from URL.


author: Mattias Ellert <mattias.ellert@physics.uu.se> - 2.1.0-0.27.rc3
changelog:
  - Update to version 2.1.0-rc3
  - Drop patches accepted upstream
  - Add new patches (the PRs have been accepted upstream)


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 0.11-1
changelog:
  - Generalize cvmfsexec-osg-wrapper (SOFTWARE-4722)
  - Have make-cvmfsexec-tarball generate a multiplatform tarball


author: Carl Edquist <edquist@cs.wisc.edu> - 1.0-1
changelog:
  - Release hosted-ce-tools 1.0 (SOFTWARE-5130)
  - Convert scripts to python3 (SOFTWARE-5131)
  - Timeout rsync in update-remote-wn-client (SOFTWARE-4670)
  - Dereference hardlinks when extracting tarball (SOFTWARE-5254)


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 5.0.1-1.1
changelog:
  - Build for OSG; add setuptools_scm build dependency (SOFTWARE-4877)
    Ignore byte-compile errors: they fail on Python 2 code in the examples


author: Dave Dykstra <dwd@fnal.gov> 1.12-1
changelog:
  - Require vault-1.10.0 and update vault-plugin-auth-jwt to version 0.12.1
    and vault-plugin-auth-ssh to version 0.1.1.


author: Dave Dykstra <dwd@fnal.gov> 1.13-1
changelog:
  - Remove support for old-style per issuer/role secret plugins.  Requires
    htgettoken >= 1.7.
  - Add ability to delete a previously defined configuration by using
    a keyword "delete:" under the configuration name and setting it to
    any value.
  - Update vault-plugin-auth-jwt to the latest commit (because the patches
    had been rebased on it).


author: Dave Dykstra <dwd@fnal.gov> 1.14-1
changelog:
  - Add auditlog configuration option.  As part of that, disable the
    vault systemd ProtectFull and ProtectHome options.
  - Require vault >= 1.12.1.
  - Update the vault-plugin-auth-jwt to the latest upstream commit.
  - Include gox in the source tarball.


author: Dave Dykstra <dwd@fnal.gov> 1.15-1
changelog:
  - Update vault-plugin-secrets-oauthapp to 3.1.1 which adds support for token
    exchange at a /sts path instead of /creds.  Keep applying the PR patch
    that also adds it under /creds for a transition period until htgettoken
    is updated everywhere to use the new path.
  - Update vault-plugin-auth-jwt to 0.15.2.
  - Update vault-plugin-auth-ssh to 0.3.0.
  - Require vault >= 1.13.
  - Require diffutils.
  - Fix bug where the kerberos policydomain option was ignored.


author: Dave Dykstra <dwd@fnal.gov> 1.16-1
changelog:
  - Add 'ratelimits' keyword to put a limit on the number of requests per
    client per interval.
  - Allow '@' to be included in the ssh plugin's keys.
  - Fix bug that prevented reconfiguration when a policy name changed.
  - Update vault-plugin-auth-jwt to 0.18.0.
  - Update vault-plugin-auth-ssh to 0.3.1.
  - Require vault to be >= 1.15.


author: Dave Dykstra <dwd@fnal.gov> 1.20-1
changelog:
  - Add make sources target for koji build
  - Add make srpm target for copr build
  - Support port numbers in https urls
  - Return all received cookies in the final getcert step
  - Add sending Server Name Indication on https connections


author: Brian Lin <blin@cs.wisc.edu> - 0.8.1-1
changelog:
  - Add the --pw-store option to the invocation of oidc-add and add a default
    scope of blank if no scopes are configured.  These are needed for the
    CILogon issuer (SOFTWARE-4983).


author: Carl Edquist <edquist@cs.wisc.edu> - 0.8.2-1
changelog:
  - Increase renewal frequency to ensure continual validity (SOFTWARE-5137)
  - Fix password file handling for restricted permissions in setup script (#17)
  - Use newer --pw-file option for oidc-add (SOFTWARE-5050)
  - Bump version requirement for oidc-agent package (SOFTWARE-5050)


author: Derek Weitzel <dweitzel@cse.unl.edu> - 1.3.1-1
changelog:
  - Fix dependency change of behavior in PyJWT
  - Add lifetime argument to scitokens-admin-create-token


author: Derek Weitzel <dweitzel@cse.unl.edu> - 1.5.0-1
changelog:
  - Include tests in distribution
  - Bump pyjwt version
  - Add test run with minimum dependencies
  - Run continuous integration on macOS and windows
  - Check verified claims for issuer in SciToken.serialize
  - Add base SciTokensException class
  - Remove verify=False keyword from calls to decode()
  - Print package list in CI jobs
  - Use python3_pkgversion macro in RPM package names
  - Move package version declaration into 'scitokens' module
  - Fix deprecation warning from cryptography.utils.int_from_bytes


author: Brian Lin <blin@cs.wisc.edu> - 1.7.0-1
changelog:
  - Reference test files using relative paths
  - Use shutil.move instead of os.rename
  - Add error message for when SciToken.discover doesn't find a token
  - SciToken.serialize: fix str/bytes mismatch
  - Add rpmbuild github actions workflow
  - Update the bogus url used in the tests
  - Fix bug decoding a token with no audience
  - Use unittest.mock to check UnableToCreateCache
  - Add obsoletes for smoother Yum updates on EL7
  - Update algorithm used to test UnsupportedKeyException
  - Run test suite using pytest during rpmbuild
  - Update pyjwt version in requirements.txt
  - small typo fix in readme
  - Default cached public keys set to 4 days


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 1.7.0-1
changelog:
  - Convert osg-system-profiler-viewer to Python 3
  - Add XRootD cconfig dumps (SOFTWARE-4933)
  - Print crypto policy if available (SOFTWARE-5330)
  - Fix email address in help message


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 3.4.0-2
changelog:
  - Add python3-condor and python3-xrootd build dependencies so we don't build RPMs for repos
    which they can't be installed from.


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 3.5.0-1
changelog:
  - Have the authfile updater get a grid-mapfile from Topology for
    stash-cache-auth and stash-origin-auth (SOFTWARE-5467)


author: Matt Westphall <westphall@wisc.edu> - 3.6.0-1
changelog:
  - Make redirector line in cache config customizable (SOFTWARE-5641)
  - check for *.local files in /etc/xrootd in authfile-updater (SOFTWARE-5597)


author: Mátyás Selmeci <matyas@cs.wisc.edu> - 3.7.0-1
changelog:
  - Make use of grid-mapfile downloaded from Topology.
    Requires osg-xrootd >= 3.6-24 (for OSG 3.6) or >= 23-6 (for OSG 23)


author: Dave Dykstra <dwd@fnal.gov> 1.11.1-1
changelog:
  - Update to upstream 1.11.1, which includes a fix to avoid denial of
    service on HA installation.
  - Remove $GOPATH/mod/*.* from the source tarball, leaving just
    $GOPATH/mod/cache/download.  That saves about 300M while still
    allowing offline builds.


author: Tim Theisen <tim@cs.wisc.edu> - 5.1.2-1
changelog:
  - Fixed the default memory and CPU requests when using job router transforms
  - Apply default MaxJobs and MaxJobsIdle when using job router transforms
  - Improved SciTokens support in submission tools
  - Fixed --debug flag in condor_ce_run
  - Update configuration verification script to handle job router transforms
  - Corrected ownership of the HTCondor PER_JOBS_HISTORY_DIR
  - Fix bug passing maximum wall time requests to the local batch system


author: Tim Theisen <tim@cs.wisc.edu> - 5.1.3-1
changelog:
  - The HTCondor-CE central collector requires SSL credentials from client CEs
  - Fix BDII crash if an HTCondor Access Point is not available
  - Fix formatting of APEL records that contain huge values
  - HTCondor-CE client mapfiles are not installed on the central collector


author: Tim Theisen <tim@cs.wisc.edu> - 5.1.4-1
changelog:
  - Fix whole node job glidein CPUs and GPUs expressions that caused held jobs
  - Fix bug where default CERequirements were being ignored
  - Pass whole node request from GlideinWMS to the batch system
  - Since CentOS 8 has reached end of life, we build and test on Rocky Linux 8


author: Tim Theisen <tim@cs.wisc.edu> - 5.1.5-1
changelog:
  - Rename AuthToken attributes in the routed job to better support accounting
  - Prevent GSI environment from pointing the job to the wrong certificates
  - Fix issue where HTCondor-CE would need port 9618 open to start up


author: Tim Theisen <tim@cs.wisc.edu> - 5.1.6-1
changelog:
  - HTCondor-CE now uses the C++ Collector plugin for payload job traceability
  - Fix HTCondor-CE mapfiles to be compliant with PCRE2 and HTCondor 9.10.0+
  - Add support for multiple APEL accounting scaling factors
  - Suppress spurious log message about a missing negotiator
  - Fix crash in HTCondor-CE View


author: Tim Theisen <tim@cs.wisc.edu> - 6.0.0-1
changelog:
  - Align HTCondor-CE security configuration with HTCondor defaults
  - Add example configuration on how to ban users
  - Add condor_ce_transform_ads command
  - Improve essential directory checking and creation at startup


author: Tim Theisen <tim@cs.wisc.edu> - 6.0.1-1
changelog:
  - Add grid CA and host certificate/key locations to default SSL search paths
  - Verifies that HTCondor-CE can access the local HTCondor's SPOOL directory
  - Can use condor_ce_trace without SciToken to test batch system integration
  - condor_ce_upgrade_check checks compatibility with next HTCondor version
  - Adds deprecation warnings for old job router configuration syntax


